1. Technical specs of the factory steel buildings ( made of steel frame ) :

The factory steel buildings ( made of steel frame ) were designed , constructed and installed by us who are professional on designing , processing and installing of steel structure building . You may give us your own drawings to enable us construct as per your request or you might just give us your ideas , we can design the project based on your ideas . Buildings of steel structure are safe , easy to install and disassemble . This steel structure can be used multiple times without special tools .

1 ) size :

MOQ is 1000 square meter , length X width X eave height , roof slope

2 ) type :

single slope , double slope , muti-slope ; single span ,

double-span , Multi-span , single floor , double floors

3 ) base :

Concrete and steel foundation bolts

4 ) column and beam :

material Q345 ( S355JR ) or Q235 ( S235JR ) steel , all bolts connection , straight cross-section or Variable cross-section

5 ) bracing :

X or V or other type bracing made from angle , round pipe etc .

6 ) c or z purlin ,

size from C100 ~ C320 , Z160 ~ Z300

7 ) roof and wall panel :

single colorful corrugated steel sheet 0.326 ~ 0.6mm thick , YX26-205-820 ( 820mm wide )

single colorful corrugated steel sheet 0.326 ~ 0.6mm thick , YX15-225-900 ( 900mm wide )

single colorful corrugated steel sheet 0.326 ~ 0.6mm thick , YX35-125-750 ( 750mm wide )

single colorful corrugated steel sheet 0.376 ~ 0.6mm thick , YX51-380-760 ( 760mm wide )

single colorful corrugated steel sheet 0.376 ~ 0.6mm thick , YX51-470 ( 470mm wide )

sandwich panel with EPS , rock wool , glass wool , PU etc insulation thickness around 50mm ~ 150mm , width 950mm or 960mm !

8 ) accessories :

Semi - transparent skylight belts , Ventilators , down pipe , out gutter etc

9 ) surface :

Paint or hot dip galvanized

10 ) packing :

main steel frame without packing load in 40'OT , roof and wall panel load in 40' HQ

2. Our business and products scope:

Our company is dedicated to steel framed buildings, from research, design, manufacture, installation and after-sales service. We mainly provide a comprehensive range of steel structure products, including multi-storey high-rise buildings( for commercial offices, hotels, residents, etc.), light steel structure system( for warehouse, workshop, supermarket etc.) and the wide-span steel structure system( for airport, exhibition center, stadium, etc. ) , factory steel buildings ( made of steel frame ) etc. Additionally, service of technology consult is available.

3. Project case- Philippines Prefabricated Cold Storage Warehouse, 2013, 2900 tons:

Main steel frame:

Steel beam & column: Q345, Welded H beam

Wind-resistant column: Q345, Welded H beam

Secondary frame:

Roof purlin: Z250*75*20*2.2

Ceiling purlin: C120*50*20*2.2

Wall purlin: C180*70*20*2

Tie bar: 102*2

Vertical & horizontal bracing: 20

Kneel-bracing: L504

Purlin bracing: Q235, 12

Sleeves tube: Q235, 32*2.5

Roof system:

Type V930 pu panel 0.5/100/0.6mm Pu panel

Wall system:

Type v930 panel 0.5/100/0.6mm Pu panel

This project is invested by the government, before the client issue the order, the client, government, and the 3rd party consulting company visited us for 4 times. Finally after compare the advantage between 6 suppliers, they choose us. The later result prove their selection are wise. We finish the project 20 days before the delivery end date, and with good quality.

4. How we ensure the high quality of factory steel buildings ( made of steel frame ) :

After years of exploration, practice and improvement, our company has built an experienced technical team in steel structure. Every project is supposed to go through the following procedures:

1) Owing plasma cutting, flame cutting, available to provide multiple cutting service.

2) Well-experienced engineer team and production team for steel structure fabrication, welder working with CWI certificate, according to WPS( welding procedure specification) and PQR( procedure qualification record) .

3) Professional non-destructive testing, fully equipped.

4) Professional surface treatment: sandblasting, paint spraying, powder coating as per American standard.

5) More than 10 years steel structure fabrication experience

6) Full set of manufacturing process plan to ensure delivery on time.

5. Our seaworthy packing system for factory steel buildings ( made of steel frame ) :

We found mature exporting packing and stuffing system:

With more than 300000tons exporting experiences, we adopt enclosed transportation to avoid damage to components caused by rough loading& unloading in delivery process. It not only guarantees components quality, but also saves the delivery cost for clients.

To improve the container delivery efficiency, we introduced advanced container stuffing equipment from Germany in 2012, which could make us finish one 40 feet container stuffing within 2 minutes.

6. FAQ:

1) How to install factory steel buildings ( made of steel frame ) ?

Reply: We will furnish you the detailed construction drawing and the construction manual which could help you to erect and install the building step by step. We also could send the engineer to your local to help you if need. if you have no work teams, we can send our professional teams to install for you.

2) Storage Life of factory steel buildings ( made of steel frame ) ?

Reply: All steel structure frame life is more than 50 Years, all cladding sheets are about 20 Years.

3) How can you deal with deformation when welding ?

We select suitable welding method, material and sequence as specified material required.